Creating A Video Clip; Viewing Snapshots; Figure 4-8 Clip Function Controls - Honeywell Performance HED1PR3 Software Configuration Manual

44 | Performance Series IP Camera Software Configuration Guide

Creating a Video Clip

You can clip and save a section of recorded video during video playback using the clip function.
1.
2.
3.
4.

Viewing Snapshots

www.honeywell.com/security
Note Creating a video clip is currently only supported for HBD3PR2/H4D3PRV2
cameras.
Figure 4-8 Clip Function Controls
Note Playback of recorded video is automatically paused during clipping.
Find the recording that you want to create a clip from.
On the timeline, click the recording at the time you want to start the clip, and then click
. This designates the start time of the clip.
Next, click the recording at the time you want to end the clip, and then click
designates the end time of the clip.
Click to save the clipped file to your local PC. To configure the saving path, see
on page 71.
Note Viewing snapshots is currently only supported for HBD3PR2/H4D3PRV2
cameras.
. This
Path