Cautions And Warnings - Honeywell Performance HED1PR3 Software Configuration Manual

Cautions and Warnings

WARNING
only by qualified and experienced technicians to conform to all
local codes and to maintain your warranty.
WARNING
standards this product is intended for use with a Listed Power
Adapter marked with "Limited Power Source", "LPS", on the unit,
output rated 12 V DC, minimum 0.7A, Tma=60°C or from Power
over Ethernet (PoE) provided by Listed Information Technology
Equipment meeting the IEEE 802.3af PoE standard.
The Ethernet connection is not intended to be connected to
exposed (outside plant) networks. Do not connect two power
sources to the camera at the same time.
CAUTION
Regulatory Statements
FCC Compliance Statement
Information to the User: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and
Installation and servicing should be performed
To ensure compliance with electrical safety
Invisible LED radiation (850 nm). Avoid exposure to beam.
| 3
800-21358 - A - 10/2015