Other Menus - Bosch VG5 600 Series User Manual

AutoDome 600 Series Analog PTZ
Camera
PTZ Setup Menu Choices:
Menu
Exit
Edit Tour 1
Edit Tour 2
Tour 1 Period
Tour 2 Period
Scan Speed
Edit Presets
Limit Stops
Recordings
AutoPivot
5.1.4

Other Menus

Menu
Edit Password
FastAddress (locked)
Software Version
(unlocked)
Ack and Reset Alarms
Bosch Security Systems, Inc.
Description
Exits the menu.�
Accesses the Add /
Remove Scenes On
Standard Tour 1 Menu.
Accesses the Edit Custom
Tour Menu.
Changes the length of
waiting time between
presets.
Changes the length of
waiting time between
presets.
Changes the Autopan and
AutoScan speeds.
Modifies preset scenes.
Toggles the Limit Stops for
AutoScan.
Selects record Pattern 1 or
2, if normal pattern
command does not
respond.
Follows a subject while
beneath the camera,
without inverting the
picture.
Description
Sets or displays the password. See Section 1.4 Setting
Passwords, page 8.
Sets or changes the AutoDome address.
Displays the camera software version.
Acknowledges and resets alarms. If there is no active
alarm input, the OSD displays the following message:
"No Active Alarms."
Sub-menu / Description
Exit: Exits the menu.
Scene (1 - 5): Adds or removes
scenes from the Standard Tour.
Exit: Exits the menu.
Scene (1 - 5): Adds or removes
scenes from the Custom Tour.
Sliding scale: – (3 sec. to 10 min.) + 5 sec.
Sliding scale: – (3 sec. to 10 min.) + 5 sec.
Sliding scale: – (1°/sec to 60°/sec)
+
1-99 scenes
ON or OFF
"A" or "B"
ON or OFF
User Manual
Pelco On-Screen Menus | en
Default
Setting
30°/
sec.
OFF
"A"
ON
Default
Setting
Not Set
2014.11 | 2.1 | F.01U.270.005
43