Other Menus - Bosch MIC Series 550 Classic Installation And User Manual

44 en | On-Screen Display (OSD) Menus (Pelco Protocol)
Menu
Scan Speed
Edit Presets
Limit Stops
Recordings
AutoPivot
8.5

Other Menus

Menu
Edit Password
FastAddress (locked)
Software Version
(unlocked)
Ack and Reset Alarms
Restore All Settings
(locked)
Reset All Memory
(locked)
F.01U.276.622 | 1.0 | 2012.09
Description
Changes the Autopan and
AutoScan speeds.
Modifies preset scenes.
Toggles the Limit Stops for
AutoScan.
Selects record Pattern 1 or
2, if normal pattern
command does not
respond.
Follows a subject while
beneath the camera,
without inverting the
picture.
Description
Sets or displays the password. See Section 6.5 Setting
Passwords, page 27.
Sets or changes the address.
Displays the camera software version.
Acknowledges and resets alarms. If there is no active
alarm input, the OSD displays the following message:
"
No Active Alarms.
Restores all settings to their original factory default
settings.
Restores all settings to their original factory default
settings and clears all user programmed settings such
as preset scenes and recordings.
Installation and User Manual
MIC Series 550 Classic Camera
Sub-menu / Description
Sliding scale: – (1°/sec to 60°/sec) + 30°/sec.
1-64 scenes
ON or OFF
"A" or "B"
ON or OFF
"
Default
Setting
OFF
"A"
ON
Default
Setting
Not Set
Bosch Security Systems, Inc.