Table of Contents
Advertisement
40
en | Pelco On-Screen Menus
Menu
Exit
Command Lock
(locked)
Bosch Menu (locked)
Camera Setup
PTZ Setup
Edit Password
(locked)
FastAddress (locked)
Software Version
Ack and Reset Alarms Acknowledges and resets active alarms.
Restore All Settings
(locked)
Reset All Memory
(locked)
Notice!
After a period of 4.5 minutes of inactivity, the OSD menu times-out and exits without warning.
Some unsaved settings can be lost!
5.1.1
Command Lock (locked)
The Pelco Command Lock Menu allows or prohibits the use of locked commands. The default
setting is ON.
Notice!
If the Command Lock is set to ON and you press Focus or Iris on a locked command, the
AutoDome displays the on-screen message: "Command is Locked."
5.1.2
Bosch Menu (locked)
The Bosch Menu allows full access to the AutoDome main Setup Menu and all AutoDome
configuration settings.
Pelco menu
Setup Menu
Exit...
Command Lock:
2014.11 | 2.1 | F.01U.270.005
Description
Exits the menu.
Allows or prohibits accessing locked commands. (If password is
set, you are prompted to enter the password.
Accesses the full AutoDome configuration menu and all AutoDome
settings.
Accesses the White Balance and Night Mode camera settings.
Accesses the tours, tour periods, scan speed, edit presets, limit
stops, recording, and AutoPivot settings.
Changes the password.
Sets or changes a camera address.
Displays the current software versions.
Restores all settings to their original default setting.
Clears all settings, including scene shots, tours, and recordings
stored in the AutoDome memory.
Bosch menu
Setup Menu
OFF
Exit...
User Manual
AutoDome 600 Series Analog PTZ
Camera
Bosch Security Systems, Inc.
Advertisement
Table of Contents
