Table of Contents
Advertisement
6
en | Getting Started
1.2
Establishing AutoDome Control
1.2.1
AutoDome 600 Interface Methods
The most common ways to interface with the AutoDome are:
–
–
–
1.2.2
Basic Keyboard Operation
The following tables summarize the basic operations for a standard keyboard and the
functions available to control an AutoDome camera.
Typical Keyboard
Features
Function Keys
Number Keys
Camera Key
Enter Key
Focus Key
Iris Key
Key LEDs
LCD
Joystick
Table 1.1: Typical Keyboard Functions
Dome Operation
To Pan Side to Side
To Tilt Up and Down
To Zoom In
To Zoom Out
Table 1.2: Typical Keyboard Controls for an AutoDome Camera
1.2.3
Keyboard Commands
Keyboard control commands are composed of a sequence of three (3) inputs with the
following convention: 1) a Function key + 2) a Command number key(s) + 3) the Enter key.
–
2014.11 | 2.1 | F.01U.270.005
Using a keyboard and on-screen display (OSD) menus. This method is the most common
and is covered in this manual.
Using the AutoDome Configuration Tool software running on a PC with Bilinx or the
RS-232/485 communication protocol. Refer to the CTFID User Manual for instructions.
Using a PC-based graphical user interface (GUI) such as the Bosch DiBos 8 software.
Refer to the DiBos 8 User Guide for instructions.
Usage
Selects a specific control setting.
Inputs a number from 0 to 9.
Selects a camera number.
Inputs a selection.
Sets the lens focus or makes a menu selection in OSD mode.
Sets the lens iris setting or makes a menu selection in OSD mode.
Indicates an active key.
Displays the current status.
Controls a pan/tilt/zoom (PTZ) AutoDome camera.
How to control
Move the joystick left or right.
Move the joystick forward and back.
Twist the joystick clockwise.
Twist the joystick counterclockwise.
Depending on the type of keyboard, the control function keys are labeled:
ON or AUX ON
OFF or AUX OFF
SET or SET SHOT
SHOT or SHOW SHOT
User Manual
AutoDome 600 Series Analog PTZ
Camera
Bosch Security Systems, Inc.
Advertisement
Table of Contents
