Other Menus - Bosch VG4-200 User Manual

38 en | Pelco On-Screen Menus
PTZ Setup Menu Choices:
Menu
Exit
Edit Tour 1
(300 and 500i
Series)
Edit Tour 2
(300 and 500i
Series)
Tour 1 Period
Tour 2 Period
Scan Speed
Edit Presets
Limit Stops
Recordings
(300 and 500i
Series)
AutoPivot
5.1.4

Other Menus

Menu
Edit Password (locked,
300 and 500i Series)
FastAddress (locked)
Software Version
(unlocked)
Ack and Reset Alarms
(unlocked, 300 and 500i
series)
Restore All Settings
(locked)
Reset All Memory
(locked)
F.01U.133.267 | 6.0 (IP4) | 2009.06
Description
Exits the menu.
Accesses the Add /
Remove Scenes On
Standard Tour 1 Menu.
Accesses the Edit Custom
Tour Menu.
Changes the length of
waiting time between
presets.
Changes the length of
waiting time between
presets.
Changes the Autopan and
AutoScan speeds.
Modifies preset scenes.
Toggles the Limit Stops for
AutoScan.
Selects record Pattern 1 or
2, if normal pattern
command does not
respond.
Follows a subject while
beneath the camera,
without inverting the
picture.
Description
Sets or displays the password. See
Passwords, Page 6
Sets or changes the AutoDome address.
Displays the camera software version.
Acknowledges and resets alarms. If there is no active
alarm input, the OSD displays the following message:
"
No Active Alarms.
Restores all settings to their original factory default
settings.
Restores all settings to their original factory default
settings and clears all user programmed settings such
as preset scenes and recordings.
User's Manual
VG4 AutoDome Modular Camera System
Sub-menu / Description
Exit: Exits the menu.
Scene (1 - 5): Adds or removes
scenes from the Standard Tour.
Exit: Exits the menu.
Scene (1 - 5): Adds or removes
scenes from the Custom Tour.
Sliding scale: – (3 sec. to 10 min.) + 5 sec.
Sliding scale: – (3 sec. to 10 min.) + 5 sec.
Sliding scale: – (1°/sec to 60°/sec)
+
1-99 scenes
ON or OFF
"A" or "B"
ON or OFF
Section 1.4 Setting
.
"
Default
Setting
30°/
sec.
OFF
"A"
ON
Default
Setting
Not Set
Bosch Security Systems, Inc.