Command Lock (Locked); Bosch Menu (Locked) - Bosch VG5 600 Series User Manual

AutoDome 600 Series Analog PTZ Camera
Menu
Exit
Software Version
Ack and Reset Alarms Acknowledges and resets active alarms.
Restore All Settings
(locked)
Reset All Memory
(locked)
NOTICE!
After a period of 4.5 minutes of inactivity, the OSD menu times-out and exits without warning.
Some unsaved settings can be lost!
5.1.1

Command Lock (locked)

The Pelco Command Lock Menu allows or prohibits the use of locked commands. The default
setting is ON.
NOTICE!
If the Command Lock is set to ON and you press Focus or Iris on a locked command, the
AutoDome displays the on-screen message: "Command is Locked."
5.1.2

Bosch Menu (locked)

The Bosch Menu allows full access to the AutoDome main Setup Menu and all AutoDome
configuration settings.
Pelco menu
Setup Menu
Exit...
Command Lock:
Bosch Menu
Camera Setup
PTZ Setup
Edit Password
*FastAddress:
Advanced
Software Version
Ack and Reset Alarms
Restore All Settings
Reset All Memory
* = Factory Setting
Focus / Iris: Select
Refer to Section 2: On-Screen Display Menu Navigation for a complete description of Bosch
menus and configuration settings.
Bosch Security Systems, Inc.
Description
Exits the menu.
Displays the current software versions.
Restores all settings to their original default setting.
Clears all settings, including scene shots, tours, and recordings
stored in the AutoDome memory.
Bosch menu
Setup Menu
OFF Exit...
Camera Setup
Lens Setup
PTZ Setup
Display Setup
Not Set Communication Setup
Alarm Setup
Language
Advanced
Diagnostics
Focus / Iris: Select
User Manual
Pelco On-Screen Menus | en
F.01U.270.005 | 2.0 | 2012.06
37