Icr - D-Link DCS-6111 User Manual

Section 3 - Configuration
ICR - IR-Cut Removable(ICR) filter is a switch mechanical design of two different sensor filters. It provides the best light conditions
both during the day and night. The following options are:
Auto: The Network Camera automatically switches
between day and night mode by judging the level
of ambient light. This mode is accessible only when
the exposure mode is set to Auto.
Day Mode: In this mode the Network Camera switches on the
infrared cut filter at all times, which will block the
infrared light from reaching the sensor so that the
colors are not distorted.
Night Mode: The Network Camera switches off the infrared cut
filter to allow the infrared light to pass through. This
helps the Network Camera to see more clearly in low
light conditions.
Schedule Mode: The Network Camera switches between day and
night mode based on a specific schedule.
Ensure to enter the starting and ending time for the
day mode. Note that the time format is [hh:mm] and
is expressed in 24-hour clock time. By default, the
starting time and ending time of day mode are set
to 07:00 and 18:00.
Disable IR LED: Select to disable the IR LED. The IR LED automatically
switches on at night. By default the LED automatically
switches on at night.
D-Link DCS-6111 User Manual

ICR

66