Adjusting The Lens - D-Link DCS-6111 User Manual

Section 3 - Configuration
Based on the live image retrieved from the camera, adjust the camera lens by performing the following procedures:
Adjusting the Viewing Angle
Loosen the pan screw and turn the lens module left and right until the desired position is achieved. Tighten the pan screw
once completed.
Loosen the tilt screws on both sides of the camera, and turn the lens module up and down until the desired position is achieved;
tighten the tilt screws once completed.
Loosen the image adjustment screw and turn the lens to adjust the network camera's image until the desired orientation is
achieved, tighten the image adjustment screw once completed.
Adjusting Zoom and Focus
Loosen the zoom controller and adjust the zoom factor by moving
the controller left and right until the desired range is achieved;
tighten the zoom controller once completed.
Loosen the focus controller and adjust the focus range by moving
the controller left and right until the image is clear; tighten the
focus controller once completed.
D-Link DCS-6111 User Manual

Adjusting the Lens

Tighten
Loosen
Loosen Tighten
Loosen
Tighten
Tighten
Loosen
23