Section 3 - Configuration
The I/O connector provides the physical interface for digital output (DO) and digital input (DI) that is used for connecting such
external alarm devices as IR-Sensors and alarm relays to the network camera.
DI and DO:
Settings for both Digital input signal and digital output
signal can be configured here.
Digital input
Please select High or Low for digital input trigger
trigger
condition. When an external device is connected to
condition:
the digital input pins, the state of the voltage will be
monitored. (Max. Input 500mA, 12Vdc)
Digital output:
Select Grounded or Open to define normal status of
the digital output. The camera will show whether the
trigger is activated or not.
D-Link DCS-6111 User Manual
Advanced
DI and DO
65