Advanced; Icr And Ir - D-Link DCS-4703E User Manual

Section 3: Configuration
Here you can configure the ICR and IR settings. The IR (Infrared) Cut-Removable (ICR) filter can be disengaged for increased sensitivity in low light
environments.
Automatic: The Day/Night mode is set automatically. You can use the Sensitivity drop-
down box to set when the camera will switch to Night mode. The text box
to the right shows what lighting conditions are currently being detected
by the camera for reference. You can refresh this status by clicking the
Refresh button.
Day Mode: Day mode enables the IR Cut Filter.
Night Mode: Night mode disables the IR Cut Filter.
Schedule Set up the Day/Night mode using a schedule. The camera will enter Day
Mode: mode at the starting time and return to Night mode at the ending time.
IR Light The camera can enable or disable the IR (infrared) light according to your
Control: preferences. This setting provides additional controls depending on your
specific application.
Off: The IR light will always be off.
On: The IR light will always be on.
Sync with ICR:
The IR light will turn on when the ICR filter is disabled (night mode).
Schedule:
The IR light will turn on or off according to the schedule that you specify
below.
D-Link DCS-4703E User Manual

Advanced

ICR and IR

42