D-Link DCS-6111 User Manual page 50

Section 3 - Configuration
Note: When you select this function, Exposure level and AGC functions will be disabled.
Switch to B/W
Select to automatically enable the camera to switch to B/W night mode.
(Night Mode):
White Balance:
Select either Auto or Fix from the drop-down box. Select Auto to automatically adjust the white balance of the object. Otherwise,
select Fix to manually set the white balance conditions in advance.
Maximum
Select to set the exposure time of the camera. 1/30s, 1/15s, or 1/5s are the available options in the drop-down box. The default
Exposure Time:
value is 1/30s.
Brightness:
Select to change the brightness value for the Network Camera. The range varies from -5 to +5.
Saturation:
Select to change the saturation value of the camera. The default value is 0.
Contrast:
Select to change the contrast value of the camera. The default value is 0.
Overlay Title and
Select to add a date and time stamp on the video.
Time Stamp on
Video:
Privacy Mask:
Select Privacy Mask to open the Privacy Mask page. In this page, you can block out certain sensitive zones for privacy concerns.
To set up a Privacy Mask Window, follow the steps given below:
1. Click New to add a window.
2. The height and width of the window should be at least twice the
size of the object in order to resize and drag-drop the window.
3. Enter a descriptive Window Name and click Save to apply changes.
4. Select Enable privacy mask to facilitate this function.
NOTE:
1. Up to five privacy mask windows can be set in the same screen.
2. Privacy masks will appear on all video stream and recording video.
3. Privacy masks will overlap with motion detection windows. The masked area will not detect any motion.
D-Link DCS-6111 User Manual 50