Hardware Overview; Connections - D-Link DCS-6111 User Manual

Section 1 - Product Overview
Reset Button Ethernet Cable Connector (PoE)
Reset is initiated when the The network camera's side panel features an
reset button is pressed RJ-45 connector for connections to 10Base-T Ethernet
once and held until cabling or 100Base-TX Fast Ethernet cabling. This
the power LED flashes network port supports the NWay protocol, allowing this
through its cycle twice. network camera to automatically detect or negotiate
the transmission speed of the network. The Ethernet
port can also be used to power the camera by using a
PoE switch.
D-Link DCS-6111 User Manual

Hardware Overview

Connections

DC Power Connector
The DC power connector is located on
the side panel of the DCS-6111. This
12V DC single-socket, supplies power
to the network camera.
Focus Controller
Zoom Controller
Tilt Screw
DI/DO
Pan Screw
Audio Out Connector
Use the Audio Out connector
for 2-way audio connection.
Speakers (not included) may
be connected to the camera for
2-way audio communication.
Adjustment Screw
Microphone On/Off Switch
To turn the microphone on/off.
MIC In (Microphone Connector)
Use the MIC connector for 2-way
audio connection. Microphone
(not included) may be connected
to the camera for 2-way audio
communication.
8