Icr And Ir - D-Link DCS-2210L/UPA User Manual

Section 4: Configuration
Here you can configure the ICR and IR settings. An IR(Infrared) Cut-Removable(ICR) filter can be disengaged for increased sensitivity in low light
environments.
Automatic:
Day Mode:
Night Mode:
Schedule Mode:
IR Light Control:
Schedule:
D-Link DCS-2210L/UPA User Manual
The Day/Night mode is set automatically. Generally, the
camera uses Day mode and switches to Night mode
when needed. Select the desired sensitivity level from
the drop-down menu.
Day mode enables the IR Cut Filter.
Night mode disables the IR Cut Filter.
Set up the Day/Night mode using a schedule. The camera
will enter Day mode at the starting time and return to
Night mode at the ending time.
The camera can enable or disable the IR (infrared) light
according to your preferences. This setting lets you
adjust IR strength depending on your specific application.
Off:
The IR light will always be off.
On:
The IR light will always be on.
Sync:
The IR light will turn on when the ICR sensor is on.
The IR light will turn on or off according to the schedule
that you specify below.

ICR and IR

52