D-Link DCS-6111 User Manual page 15

Section 3 - Configuration
Configuring Your Camera with the Installation Wizard
If the D-Link Installation Wizard window does not pop up after completion of software installation, click on the icon that
was created in your Windows Start Menu.
The Installation Wizard will appear and show the MAC address and IP address of your DCS-6111, which may appear to be
different from the actual address depending on what your device is connected to. If you have a DHCP server on your network,
there will be a valid IP address displayed here.
Note: A DHCP server is a device that supplies the same IP address.
To begin setup, single-click on the DCS-6111 located in the camera list and
click Manual Setup located on the left of the Installation Wizard.
Click Manual Setup
D-Link DCS-6111 User Manual 15