Icr - D-Link DCS-3714 User Manual

Configuration
You may configure the ICR settings here. An IR(Infrared) Cut-Removable(ICR) filter can be disengaged for increased sensitivity in low
light environments.
Automatic:
The Day/Night mode is set automatically. Generally, the camera
uses Day mode and switches to Night mode when needed.
Day Mode:
Day mode enables the IR Cut Filter.
Night Mode:
Night mode disables the IR Cut Filter.
Schedule Mode:
Set up the Day/Night mode using a schedule. The camera will
enter Day mode at the starting time and return to Night mode at the
ending time.
DC Power
The DC 12V Power Output port can supply 12V DC, 100mA of
Output:
power to another device (such as a spotlight or infrared lamp). Its
default setting is Off, meaning it will not supply power. You can
select On to turn on the power supply. If you choose Sync With
ICR, the power output will be enabled whenever the IR Cut Filter
is active. Alternatively, you can select Schedule and manually
specify when the power should be enabled.
DC Power Output
12V DC, 100mA
D-Link DCS-3714 User Manual

ICR

49