Removal Of The Piston; Removal Of The Ignition Casing - PEUGEOT 50 CC Workshop Manual

Removal of the piston.

- Remove one of the circlips (1) with pliers.
- Remove the gudgeon pin.
- Remove the piston (2).

Removal of the ignition casing.

- Remove the 4 fixing bolts (1) (85 mm).
- Remove the 4 fixing bolts (2) (100 mm).
Note: No tools are necessary for removing
the ignition casing.
Tightening torque: 1 m.daN.
- Remove the ignition casing (3).
- Remove the 2 centring pillars (4) and the
paper gasket (5).
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
1
3
DISASSEMBLY
2
1
2
5
4
17