Refitting Specific Components; Assembly Of The Engine Casings - PEUGEOT 50 CC Workshop Manual

REFITTING SPECIFIC COMPONENTS

REFITTING SPECIFIC COMPONENTS

Assembly of the engine casings.

Note: Every time the carnkcase is opened,
change the lip seals.
- Change the lip seal of the crankcase (Position
the lip seal using tool P/N 757990).
- Fit the conrod and crankshaft assembly, and
the timing chain into the LH crankcase.
- Install the 2 centring pillars (1).
- Install the gasket (2).
- Place the RH casing over the LH casing.
Note: No tools are necessary for assem-
bling the casings, which shall be car-
ried out without effort.
- Fit the screw (3).
- Fit the centring pillar (4) and the 2 O-rings (5)
of the oil pump.
22
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
1
5
3
2
4