Installing The Ignition Casing - PEUGEOT 50 CC Workshop Manual

- Install the oil pump.
- Fit the 3 clamping bolts.
- Fit the plastic sprocket that drives the oil
pump (6).
- Fit the gasket and the 2 centring pillars.
Tightening torque: 1 m.daN.

Installing the ignition casing.

- Position the lip seal (1) using tool P/N 756668.
Note: Every time the carnkcase is opened,
change the lip seals.
- Install the ignition casing (2).
- Fit the 4 screws (3) (85 mm).
- Fit the 4 screws (4) (100 mm).
- Check the crank assembly turns freely in the
casings.
Tightening torque: 1 m.daN.
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
REFITTING SPECIFIC COMPONENTS
756668
2
3
6
1
4
23