PEUGEOT 50 CC Workshop Manual page 31

Note: When re-installing, make sure the
key (3) is properly positioned on the
crankshaft stem as shown in the
figure.
- Fit the rotor to the crank ensuring it is
positioned on the key.
- Lock the rotor with the adjustable pin wrench
P/N 752237.
- Fit and tighten the rotor nut.
Tightening torque: 5 m.daN.
Important: Using an inappropriate tool can
damage the windings of the flywheel
magneto.
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
REFITTING SPECIFIC COMPONENTS
3
29