Removal Of The Rocker Cover; Removal Of The Pulsair - PEUGEOT 50 CC Workshop Manual

DISASSEMBLY
- Remove the 2 screws (4) that secure the
volute on the clutch side.
- Remove the cooling volutes.
- Remove the air seal (5).

Removal of the rocker cover.

- Remove the 4 fixing bolts (1).
- Remove the 2 screws that secure the pulsair
pipe (2).
- Remove the cylinder head cover equipped
with its rubber gasket.
Tightening torque: 1 m.daN.
Note: The O-ring must be changed every
time it is removed.

Removal of the pulsair.

- Remove the pulsair filter.
- Remove the 2 bolts (1).
- Remove the screw (2).
- Remove the pulsair cover (3).
- Remove the flap valve (4).
10
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
2
4
4
5
1
3
1
2