Table of Contents
Advertisement
NOTES:
Soft Program selects the Program which sounds when playing at a velocity lower than that of the velocity switch
point.
Velocity SW (Switch) Point sets the velocity value at which the two Programs are separated.
Loud Program selects the Program which sounds when playing at a velocity higher than that of the velocity
switch point.
*
If
the Velocity SW point is set to l, the soft Program will not sound.
Soft Level sets the level (volume) of the soft Program. The volume, when set to 99 is the full volume as set in
the Program parameter, and 0 mutes the Program completely.
Soft Panpot assigns the output of the soft Program to outputs A through D. The selection is as follows: A, A:B
(9:1to1:9), B, C, C
+ D, and D.
*
When the Drum Kit Program is selected, the display shows "SND" and the Panpot setting in the
GLOBAL Mode is operative.
Damper has no effect on the soft Program when Soft Damper is set to DIS
.
Loud Level sets the level (volume) of the loud Program. The volume, when set to 99 is the full volume as set
in the Program parameter, and 0 mutes the Program completely
.
Loud Panpot assigns the output of the loud Program to outputs A through
D.
The selection is as follows
:
A,
A:B (9
:
l to 1 :9), B, C, C
+ D, and D.
Damper has no effect on the loud Program when Loud Damper is set to DIS.
71
Advertisement
Table of Contents
