NOTES:
Lower Program selects the Program which sounds when playing keys lower than the split point.
Split point sets the keyboard position at which the sounds are separated.
Upper Program selects the Program which sounds when playing keys higher than the split point.
*
Split point is the lowest key in the upper Program.
Lower Level sets the level (volume) of the lower Program. The volume, when set to 99 is the full volume as
set in the Program parameter, and 0 mutes the Program completely.
Lower Pan pot assigns the output of the lower Program to outputs A through D. The selection is as follows: A,
A:B (9
:
1 to 1
:9),
B, C, C
+ D, and D.
Damper has no effect on the lower Program when Lower Damper is set to DIS.
Upper Level sets the level (volume) of the upper Program. The volume, when set to 99 is the full volume as
set in the Program parameter, and 0 mutes the Program completely.
Upper Panpot assigns the output of the upper Program to outputs A through D. The selection is as follows: A,
A:B (9:1 to 1:9), B, C, C
+ D, and D.
Damper has no effect on the upper Program when Upper Damper is set to DIS.
69