Table of Contents
Advertisement
F 5 - 2 MIDI FILTERING
MIDI FILTERING
PROG:~NR
RFTT:DIS
CMB/PROG Chan9e'
CNTL: EMR EXCL: DIS
A
B
C
D
E
F
G
H
-------4iiiiiiii
[fil
@]
[I]
IBl
*
*
*
*
*
*
Combination/Program Change
DIS/ENA When set to DIS, the selected MIDI data is not received or sent.
After Touch
DIS/ENA
Control Change
DIS/ENA
Exclusive
DIS/ENA
This function prevents the particular MIDI data from being sent or received. (This is called filtering.)
Data is filtered when recording to the sequencer, but is not filtered during playback.
Combination (or Program) change messages are not sent or received when setting
Combination/Program Change to DIS.
Control change messages are not sent or received when Control Change is set to DIS.
After touch messages are not sent or received when setting After Touch to DIS.
Parameter change messages by system exclusive are not sent or received when setting Exclusive to DIS.
NOTE: Parameter change by system exclusive is used to edit Programs with the use of a computer.
When
connecting 2 M1 Rs or the M1 R with an M1 and setting Exclusive to ENA, Program editing is done on both
devices at the same time. Set it to DIS when connecting MIDI instruments other than the M1 or M1 R.
F 6 - 1 PROGRAM MEMORY PROTECT
llil
~
*
*
*
*
PROGRRM MEMORY PROTECT
Inlernal:OFF
Card: ON
A
B
C
D
E
F
G
H
-----4iiiiiiii------
4iiiiiiii4iiiiiiiiiiiiil
Internal
OFF/ON
Internal memory protect (prevents writing to memory)
Card
OFF/ON
Memory protect of memory card (prevents writing to card)
This function prevents Programs and Program parameters from being written to internal memory or
RAM card.
When Internal is set to ON, writing to internal memory cannot be executed
.
When Card is set to ON, writing to RAM card cannot be executed.
Writing to RAM card is also prevented by the protect switch in the top part of the card.
116
Advertisement
Table of Contents
