Table of Contents
Advertisement
F 9 - 1 SA VE TO CARD
,-
SAVE
to
CARD
(
EROG/COMBI
)
[SAVE]
I
A
B
C
0
E
F
C
H
----------
[fil
@]
*
*
*
*
PROG/COMBI
Saving all Programs and Combinations (When PROG/COMBI Card,
PROG/COMBI/SEQ Card are used)
SEQUENCE
Saving all sequence data (songs, patterns) (When SEQ Card, PROG/COMBI/
SEQ Card are used)
PROG/COMBI/SEQ
Saving all Programs, Combinations and sequence data (When
PROG/COMBI/SEQ Card are used)
[SAVE]
Executing the save
Saves (or writes) the data stored in the internal memory to RAM card
.
When saving
to
a new, blank card, format the card first following the instructions of F 9-2, then save.
Save
cannot
be executed when the card memory protect is set to ON. (Cancelling the card memory
protect is done in functions F 6 - 1 through F 6 - 3.)
Set the Protect Switch at the top of the card to OFF beforehand.
NOTE: This function erases any and all data existing in the card. It is recommended that you retain all important
data and save new data to a blank RAM card.
*
*
*
*
*
The display prompts for confirmation after pressing [SAVE] (
[Q] ).
Press [YES] (
[Q] )
to save and
[NO]
(
[HJ )
to cancel.
Global parameters (F 0 - 1 through F 5 - 2) are saved together at the same time when selecting
PROG/COMBI or PROG/COMBI/SEQ.
When the the format of the card differs from the structure of the internal memory, saving is executed
as follows:
Programs and Combinations are saved and assigned according to the memory capacity available.
No sequence data is saved at all if the memory space of the receiving device is smaller than that of the
sending device.
(See F 9-2 FORMAT CARD for information on formatting.)
(See p.16 for more about cards and the structure of the internal memory.)
120
Advertisement
Table of Contents
