Table of Contents
Advertisement
F 8 -
1
LOAD FROM CARD
LORD
f
roM
CRRO
<eROG/COMBI/SEQ)
CLORD1
A
B
C
0
E
F
G
H
fiiiiiiiiiit ....... fiiiiiiiiiit .............. tiiiiiiiiiiiiii ..............
[fil
PROG/COMBI
Loading of all Programs and Combinations (When PROG/COMBI Card,
PROG/COMBI/SEQ Card are used)
SEQUENCE
Loading all sequence data (songs, patterns) (When SEQ Card, PROG/COMBI/SEQ
Card are
used)
PROG/COMBI/SEQ
Loading all Programs, Combinations and sequence data (When PROG/COMBI/SEQ
Card are
used)
@)
[LOAD]
Executing the load
*
This function loads (or writes in) the data in the ROM card or RAM card to internal memory.
NOTE: This function erases any and all data existing in internal memory. It is recommended that you save all
internal memory data to a RAM card before loading.
*
*
*
The display prompts for confirmation after pressing [LOAD] (
[Q] ).
Press [YES] (
[Q] )
to save and
[NO] (
IHJ )
to cancel.
.
When the format of the card differs from the structure of the internal memory, loading is executed as
follows:
Programs and Combinations are loaded and assigned according to the memory capacity available.
*
No sequence data is loaded at all if the memory space of the receiving device is smaller than that of
the sending device.
*
Programs COO - C99 used in the Combination parameters are loaded and replace IOO - 199.
(See F 9 - 2 FORMAT CARD for information on formatting.)
(Seep. 16 for more about cards and the structure of the internal memory.)
119
Advertisement
Table of Contents
