Table of Contents
Advertisement
F 7 -1 MIDI DATA DUMP
MIDI ORTR DUMP
EROGRRM )
EDUMPJ
A
8
C
0
E
F
C
H
&iiiiiiiit4iiiiiiiiiittiiiiiiiiiiiiii4iiiiiiiiiit4iiiiiiiiiit _
_ _ _ _
[fil
@)
*
*
*
*
*
*
*
*
*
Program
Transmission of all Program parameters
Combination
Transmission of all Combination parameters
Global Data
Transmission of Global Mode data (F0-1 -FS-2)
SEQ Data
Transmission of all the sequence data
All Data
Transmission of all the Program/Combination/Sequence data/Global parameters
[DUMP]
Executing the Dump
Transmits (or dumps) all parameter/sequence data to another MIR or Ml connected through MIDI.
MIDI data dump can be sent and received when this page is selected regardless of the Exclusive
parameter setting of F 5 -2, MIDI Filtering.
For receiving, no particular operations are necessary except for setting the memory protect to
OFF.
Program sends all the Program parameters
.
Combination sends all the Combination parameters.
SEQ data sends all the sequence data
.
All Data sends all Program parameter, Combination parameter and sequence data at the same time
.
Dump is executed by pressing the [DUMP] (
[Q] )
Program data and sequence data can be saved on external devices, providing that MIDI devices which
can save system exclusive data (such as the KORG SQD - 8) are
used.
Type of Data
Length of Exclusive
Message
(Large Program Allocation)
Program (100)
Combination (100)
Global Data
Sequence
Data
All Data
Approximately 16 K
Approximately 14 K
Approximately 1 K
2K-22K
33K-53K
(Large
Sequence Allocation)
Program
(50)
Combination (50)
Global Data
Sequence Data
All Data
Approximately 8 K
Approximately 7 K
Approximately 1 K
2 K-37 K
18K-53K
*
Transmission and reception through the Dump function will not occur if the memory allocation of the
MIR in reception differs from that of the device that is sending
.
*
See the end of the manual for details on system exclusive data.
118
Advertisement
Table of Contents
