Table of Contents
Advertisement
Configure the TS-1542
Ethernet Setup
On the TS-1542 Setup screen, tap Ethernet Setup to display the Ethernet Setup screen.
Ethernet Setup Screen
The Ethernet Setup screen displays the TS-1542's MAC and IP addresses, subnet mask,
default router, primary and secondary DNS, hostname, and domain. There are controls for
turning DHCP on and off. When DHCP is off, a Set Static IP Address Settings button
provides access to controls that allow editing of these settings. This screen also contains a
link indicator to show the status of the Ethernet connection.
DHCP is enabled by default. To change to a static IP address, tap Off under DHCP
Enabled, and then tap Set Static IP Address Settings to display the Ethernet Setup -
Static IPs screen.
Ethernet Setup - Static IPs Screen
2 • TS-1542/TS-1542-C: 15.6˝ HD Touch Screen
Supplemental Guide – DOC. 7824B
Hide quick links:
Advertisement
Table of Contents
