Advertisement
TSW-770R and TSW-1070R
7 in. and 10.1 in. Wall Mount Touch Screens, Crestron Home™ OS Version
Configure the Touch Screen
When power is applied for the first time, the touch screen boots to the
Crestron Home application setup screen. The touch screen may take up
to two minutes to boot.
Device settings for the touch screen may be configured using the built-in
setup screens or the web configuration interface. For more information
on configuring the touch screen, refer to the
TSW-1070 Product
Manual.
TSW-570, TSW-770, and
Access the Device Setup Screens
To access the built-in setup screens, place five fingers on the display and
hold for 15 seconds. The main Setup screen is displayed (TSW-1070
shown).
Use the setup screens to configure various settings for the touch screen,
including Ethernet setup, IP table setup, audio setup, display setup,
standby timeout,Wi-Fi network setup, and diagnostics.
NOTE: Time zone settings do not need to be configured on the touch
screen, as these settings will be pushed to the touch screen from the
control system running Crestron Home.
Quick Start
5
Advertisement
