Configure The Touch Screen - Crestron TSW-570 Quick Start Manual

TSW-570/TSW-770/TSW-1070
5 in., 7 in., and 10.1 in. Wall Mount Touch Screens
Mount the Touch Screen
After all connections have been made, push the touch screen gently into
the mounting bracket so that its rear housing is secured within the center
opening within the mounting bracket.
If the touch screen is not level after installation, pull it out of the mounting
bracket and loosen the screws holding the bracket into place. This
procedure allows the mounting bracket to be rotated slightly.
Once the mounting bracket has been repositioned, retighten the screws,
reinstall the touch screen into the bracket, and ensure that the touch
screen is now level.

Configure the Touch Screen

When power is applied for the first time, the following screen is displayed.
The touch screen may take up to two minutes to boot.
Quick Start
6