TOHATSU 50 Owner's Manual page 73

n Washing with fresh water
When the engine has been used in salt water or polluted water, wash the
exterior and flush the cooling passage with fresh water using the flushing
plug.
Screw the included flushing plug (hose adapter) into the wash hole on the
gear case. Connect a water hose to the flushing plug and flush out with
water. (Be sure to secure the water strainer and sub-water strainer on the
gear case beforehand.)
Flushmg
plug
Scaling tape
I
AA
WARNING
I
I
To prevent rotation of the propeller, remove it before flushing the
mssaae. I
Wash the engine before long-term storage.
Run the engine at low speed with the Remote Control lever set to Neutral to
flush out fresh water from the cooling system and in the process remove salt,
mud and other foreign particles.
70