TOHATSU 50 Owner's Manual page 70

9. ADJUSTMENT
1 Remote Control Lever Load
(M40DEPOm M40DEPTO)
(Throttle friction adjustment screw)
To adjust the load of the Remote
Control Lever, turn the throttle
friction adjustment screw on the
front of the Remote Control Box.
Turn clockwise to mcrease the load
and counter-clockwise to decrease
it.
2 Trim Tab Adjustment
If straight-line cruising can not be achieved. adjust the trim tab located under
the anti-cavitation plate.
W If the boat veers toward the right, direct the trim tab towards A
q
If the boat veers toward the left, direct the trim tab towards B
I
'J
VLl
Turning right
NOTES:
I. The tr;m tab also acrs ax an anode to prevent electrolytic corroxion. Thu
do not paint or grease this part.
2. After adjustment securely tighten the irim tab fixing bolt.
3. Check for looseness of the bolt and the trim tab at regular intervals. Due
to corrosion, the trim tab will over time wear down.
67