Tray Use In Copy Mode (Mfc-6490Cw Only); Tray Use In Fax Mode (Mfc-6490Cw Only) - Brother MFC-5890CN User Manual

Chapter 3
Tray use in Copy mode
(MFC-6490CW only)
You can change the default tray the machine
will use for printing copies.
To change the default setting follow the
instructions below:
a
Press Menu.
b
Press a or b to choose
General Setup.
Press OK.
c
Press a or b to choose Tray Setting.
Press OK.
d
Press a or b to choose
Tray Use:Copy.
e
Press d or c to choose Tray#1 or
Tray#2.
Press OK.
f
Press Stop/Exit.
Note
You can change the paper size and tray
selection temporarily for the next copy.
(See Paper Size on page 97 and Tray
Select (MFC-6490CW only) on page 97.)
28
Downloaded from ManualsPrinter.com Manuals
Tray use in Fax mode
(MFC-6490CW only)
3
You can change the default tray the machine
will use for printing received faxes.
Auto Select will allow your machine to
take paper from Tray #1 first, or from Tray #2
if:
Tray #1 is out of paper.
Tray #2 is set to a different paper size that
is more suitable for the received faxes.
Both trays are using the same size paper
and Tray #1 is not set to use plain paper.
a
Press Menu.
b
Press a or b to choose
General Setup.
Press OK.
c
Press a or b to choose Tray Setting.
Press OK.
d
Press a or b to choose Tray Use:Fax.
e
Press d or c to choose Tray#1,
Tray#2 or Auto Select.
Press OK.
f
Press Stop/Exit.
3