Brother MFC-5890CN User Manual page 19

9
Mem. Mem. Mem.
d or c
Press to scroll backward or forward to a
menu selection.
Also, press to choose options.
a or b
Press to scroll through the menus and options.
Menu
Access the main menu.
OK
Choose a setting.
Clear/Back
Press to delete characters or to go back to
the previous menu level.
5 Start keys:
Colour Start
Lets you start sending faxes or making
copies in full colour. Also lets you start a
scanning operation (in colour or mono,
depending on the scanning setting in the
ControlCenter software).
Mono Start
Lets you start sending faxes or making
copies in monochrome. Also lets you start a
scanning operation (in colour or mono
depending on the scanning setting in the
ControlCenter software).
Downloaded from ManualsPrinter.com Manuals
Fax Fax Fax
12:45 12:45 12:45
21.12.2009 21.12.2009 21.12.2009
3
8
4
6 Power Save
Lets you put the machine into Power Save mode.
7 Stop/Exit
Stops an operation or exits from a menu.
8 Ink Management
Lets you clean the print head, print a test page
to check the print quality, and check the
available ink volume.
9 LCD (liquid crystal display)
Displays messages on the screen to help you
set up and use your machine.
Also, you can adjust the angle of the LCD by
lifting it.
10 One Touch keys
These 3 keys give you instant access to
6 previously stored numbers.
Shift
To access One Touch numbers 4 to 6, hold
down Shift as you press the One Touch key.
Also, if no number is assigned to the key, you
can directly store the number by pressing the
empty key.
General Information
7 6
5
7
1