Table of Contents
Advertisement
Available languages
Available languages
6)
by pressing 8 FF or 7 REW on the set, fast winding of the tape is possible in both directi-
ons.
7)
To stop the tape, press < /
The keys are automatically released at the end of the tape, except if ; PAUSE has been acti-
vated.
RECORDING
GENERAL INFORMATION ON RECORDING
•
Recording is permissable in so far as copyright or other rights of third parties are not infrin-
ged.
•
This deck is not suitable for recording on CHROME (IEC II) or METAL (IEC IV) type casset-
tes. For recording, use NORMAL (IEC I) type cassettes on which the tabs have not been
broken. The best recording level is set automatically.
Altering the VOLUME will not affect the recording in
progress.
•
At the very beginning and end of the tape, no recording
will take place during the 7 seconds, when the leader
tape passes the recorder heads.
•
To protect a tape from accidental erasure, have the tape
in front of you and break out the left tab. Recording on
this side is no longer possible. To record over this side
again, cover the tab hole with a piece of adhesive tape.
RECORDING FROM THE RADIO
1)
Tune to the desired radio station (see RADIO RECEPTI-
ON).
2)
Press < /
STOP/EJECT to open the cassette door.
3)
Insert a suitable cassette into the deck and close the
cassette door.
4)
Press = RECORD and 4 PLAY buttons together to start
recording.
5)
For brief interruptions, press ; PAUSE. To resume recor-
ding, press ; PAUSE again.
6)
To stop recording, press < /
RECORDING FROM CD
1)
Set the FUNCTION selector to CD.
2)
Press < /
STOP/EJECT to open the cassette door.
3)
Insert a suitable cassette into the deck and close the cassette door.
4)
Press = RECORD and 4 PLAY buttons together. The recording function is now on stand-
by mode.
5)
Activate the CD player, and then press the ; PAUSE button to start recording.
6)
To stop recording, press the ; PAUSE button first and then press the STOP button on the
CD player.
Tape deck maintenance
To ensure quality recording and playback of the tape deck, clean parts [A], [B] and [C] after
approx. 50 hours of operation or on average once a month. Use a cotton bud slightly moistened
with alcohol or a special cleaning fluid
STOP/EJECT.
STOP/EJECT.
ENG - 40
Advertisement
Table of Contents
