Table of Contents
Advertisement
S
S
UPER
ERVER 2016Ti-HTRF User's Manual
1-3
Server Chassis Features
The following is a general outline of the main features of the SC217HQ-R920B 2U
chassis. Details on the chassis can be found in Chapter 6.
System Power
The SC217HQ-R920B includes a redundant (dual) 920W power supply, which pro-
vides power to both serverboards (nodes). If either power supply failes, the other
will allow the system to continue to run.
SATA Subsystem
The SC217HQ-R920B chassis was designed to support 24 SATA hard drives, which
are hot-swappable units. There are six hard drives per node in the system.
Control Panel
The SC217HQ-R920B features four independant control panels. Each control
panel has LEDs to indicate power on, network activity, power fail, fan fail, system
overheat conditions and the UID LED for it's own specifi c node. Each control panel
also includes a main power button and a UID button.
Rear I/O Panel
The SC217HQ-R920B is a 2U rackmount chassis. Its I/O panel provides slots for
four low-profi le PCI Express x16 expansion cards, four COM ports, eight USB ports,
four VGA ports and eight Gb Ethernet ports. See Chapter 6 for details.
Cooling System
The SC217HQ-R920B chassis has an innovative cooling design that features four
8-cm high-performance fans. A fan speed control setting in BIOS allows fan speed
to be determined by system temperature. See Chapter 6 for details.
1-4
Advertisement
Table of Contents
