Supermicro SuperServer 2016Ti-HTRF User Manual page 58

SUPERSERVER 2016Ti-HTRF User's Manual
SMB Bus to PCI Slots
Use jumpers JI 2 C1 and JI
able PCI Slot SMB (System Manage-
ment Bus) support to improve system
management for the PCI slots. See
the table on the right for jumper set-
tings. The default setting is disabled.
USB Wake-Up
Use the JPUSB1 jumper to enable
the "System Waking-Up via USB
devices" function. This jumper al-
lows you to "wake-up" the system by
pressing a key on the USB keyboard
or by clicking the USB mouse of your
system. This jumper is used together
with the USB Wake-Up function in the
BIOS. Enable both the jumper and the
BIOS setting to enable this function.
See the table on the right for jumper
settings.
Note: The default setting is disabled.
When the "USB Wake-Up" function is
enabled in the BIOS and JPUSB1 is
also enabled, please be sure to re-
move all other USB devices from the
USB ports whose USB jumpers are
set to "Disabled" before the system
goes into standby mode.
TPM Support Enable
JPT1 allows the user to enable TPM
(Trusted Platform Modules) support
to enhance data integrity and system
security. See the table on the right for
jumper settings. The default setting
is Enabled.
2 C2 to en-
Jumper Setting
Pins 1-2
Pins 2-3
5-24
2
I C to PCI-Slots
Jumper Settings
Jumper Defi nition
Closed Enabled
Open Disabled
USB Wake-Up
Jumper Settings
Defi nition
Enabled
Disabled
TPM Support
Jumper Settings
Jumper Setting Defi nition
Pins 1-2 Enabled
Pins 2-3 Disabled