5-11 Onboard Indicators - Supermicro SuperServer 2016Ti-HTRF User Manual

SUPERSERVER 2016Ti-HTRF User's Manual

5-11 Onboard Indicators

LAN1/2 LEDs
The Ethernet ports (located beside the
VGA port) have two LEDs. On each
port, the yellow LED indicates activity
while the other LED may be green,
amber or off to indicate the speed of
the connection. See the table on the
right for the indication associated with
the connection speed LED.
IPMI Dedicated LAN
In addition to LAN ports, a dedicated
IPMI LAN is also installed on the
X8SiT-HF. The yellow LED indicates
activity, while the green LED indicates
the speed of the connection. See the
table at right for more information.
Memory Status LED
A Memory Status LED is located at
LE3. When LE3 blinks it indicates that
a memory error has been detected.
Onboard Standby Power LED
An Onboard Standby Power LED is
located at LE4 on the motherboard.
When LE4 is on, the AC power cable
is connected. Make sure to discon-
nect the power cable before removing
or installing any component. See the
layout below for the LED location.
LAN1/2 LED
(Connection Speed Indicator)
LED Color Defi nition
Off No Connection or 10 Mb/s
Green 100 Mb/s
Amber 1 Gb/s
IPMI LAN Link LEDs
LED Color
Link (left) Green: Solid
Activity Yellow: Blinking
(right)
Onboard Standby PWR LED
LED Settings
LED Defi nition
Off System Off
On System on or system off
and power cable con-
nected
5-26
Defi nition
100 Mbps
Active