NetComm NF10W User Manual page 32

FIELD
Select a Service or custom
Server
Server IP Address
External Port Start
External Port End
Protocol
Internal Port Start
Internal Port End
Click Save/Apply to save your settings when you have finished creating virtual servers.
Port Triggering
Some applications require specific ports in the Router's firewall to be open for access by remote parties. Port Triggering opens up
the 'Open Ports' in the firewall when an application on the LAN initiates a TCP/UDP connection to a remote party using the
'Triggering Ports'.
The Router allows the remote party from the WAN side to establish new connections back to the application on the LAN side using
the 'Open Ports'. A maximum 32 entries can be configured.
To add a Trigger Port, press the Add button.
www.netcommwireless.com
v1.1
Select a pre-configured port forwarding rule or choose custom server to create your own port
forwarding rule.
Enter the IP address of the local server.
Enter the starting external port number (when custom server is selected). When a service is connected
this field will be completed automatically.
Enter the ending external port number (when custom server is selected). When a service is connected
this field will be completed automatically.
Options include TCP, UDP or TCP/UDP.
Enter the starting internal port number (when custom server is selected). When a service is connected
this field will be completed automatically.
Enter the ending internal port number (when custom server is selected). When a service is connected
this field will be completed automatically.
DESCRIPTION
NetComm Wireless NF10W User Guide
32