Selecting An Input Signal; Selecting An Aspect Ratio - Hitachi CP-TW2505 User Manual

Operating

Selecting an input signal

1.
Press the
Each time you press the button, the
projector switches its input port from
the current port as below.
COMPUTER IN1  COMPUTER IN2
VIDEO
HDMI 2
HDMI 1/MHL
● While ON is selected for AUTO SEARCH item in OPTION menu (69), the projector
will keep checking the ports in above order repeatedly till an input signal is detected.
● It may take several seconds to project the images from the USB TYPE B port.

Selecting an aspect ratio

1.
Press ASPECT button on the remote control.
Each time you press the button, the projector switches the
mode for aspect ratio in turn.
 For a computer signal
NORMAL  4:3  16:9  16:10  NATIVE
 For HDMI
TM
NORMAL  4:3  16:9  16:10  14:9  NATIVE
 For a video signal or component video signal
4:3  16:9  16:10  14:9  NATIVE
 For an input signal from the LAN, USB TYPE A or USB TYPE B port, or
if there is no signal
16:10 (fixed)
● The ASPECT button does not work when no proper signal is inputted.
● NORMAL mode keeps the original aspect ratio setting.
● The on-screen menu might be displayed outside of the image display area
depending on the adjustment value of the ASPECT, D-ZOOM,
KEYSTONE and PERFECT FIT. Changing the values of ASPECT, D-ZOOM,
KEYSTONE,
28
button on the projector.
USB TYPE B
and MHL signal
KEYSTONE and PERFECT FIT may fix the symptom.
INPUT button
INPUT IWB CALIBRATION
ASPECT AUTO ACCENTUALIZER HDCR
FOCUS D-ZOOM
- +
- +
PAGE VOLUME
MAGNIFY MYBUTTON
UP ON
1 ＋
DOWN OFF 2 ー
KEYSTONE/
PERFECT FIT TEMPLATE FREEZE AV MUTE
LAN
ESC MENU
ENTER
USB TYPE A
POSITION RESET
INPUT button
ASPECT button
INPUT IWB CALIBRATION
ASPECT
AUTO ACCENTUALIZER HDCR
D-ZOOM
FOCUS
+ - +
-
PAGE MAGNIFY MYBUTTON VOLUME
UP ON
1
2
DOWN OFF
KEYSTONE/
PERFECT FIT TEMPLATE FREEZE AV MUTE
ESC MENU
ENTER
POSITION RESET
KEYSTONE,
＋
ー