Remote Control - Hitachi CP-TW2505 User Manual

Remote control

Remote control
Installing the batteries
Please insert the batteries into the remote control before using it. If the remote control
starts to malfunction, try to replace the batteries. If you will not use the remote control for
long period, remove the batteries from the remote control and store them in a safe place.
1.
Remove the battery cover.
2.
Align and insert the two AA batteries (Use the appropriate
AA carbon-zinc or alkaline batteries (nonrechargeable) in
accordance with laws and regulations.) according to their
plus and minus terminals as indicated in the remote control.
3.
Put the battery cover back to the former state.
WARNING
directed. Improper use may result in battery explosion, cracking or leakage,
which could result in fire, injury and/or pollution of the surrounding environment.
• Be sure to use only the batteries specified. Do not use batteries of different
types at the same time. Do not mix a new battery with used one.
• Make sure the plus and minus terminals are correctly aligned when loading a battery.
• Keep a battery away from children and pets.
• Do not recharge, short circuit, solder or disassemble a battery.
• Do not place a battery in a fire or water. Keep batteries in a dark, cool and dry place.
• If you observe battery leakage, wipe out the leakage and then replace a
battery. If the leakage adheres to your body or clothes, rinse well with water
immediately.
• Obey the local laws on disposing the battery.
20
►Always handle the batteries with care and use them only as