Slideshow Mode - Hitachi CP-TW2505 User Manual

PC-LESS Presentation (continued)

Slideshow mode

The Slideshow mode displays images in full screen and switches the images at
intervals set in INTERVAL on the Thumbnail screen menu (119).
You can start this function from the Slideshow menu. To display the Slideshow
menu, select the SLIDESHOW button in the Thumbnail mode and press the
ENTER button on the remote control,
[ENTER] on the Web Remote Control.
While the Slideshow is displayed, the following button operations are enabled
when still images are displayed, and the same button operations in the Full
Screen mode are enabled when movies are displayed.
Button operation
The remote
Control panel
control
ENTER INPUT
NOTE
• These operations are not accessible while the projector OSD is
displayed.
• It is not possible to change the input port by using the
Thumbnail screen, Slideshow, or Full Screen is displayed.
• When the Slideshow mode is set to ONE TIME and the last file is a still image,
the last slide of the presentation will remain displayed until the ENTER button
on the remote control or Web Remote Control, or the
panel is pressed.
button on the control panel, or click
Web Remote
Control
[ENTER]
Presentation tools
Functions
Displays thumbnail
button when the
button on the control
123