Table of Contents
Advertisement
Phenomena that may be easy to be mistaken for machine defects (continued)
Phenomenon
The tip of the
pen does not
coincide with
the pen cursor.
(continued on next page)
Cases not involving a machine defect
Has calibration been performed?
Press the CALIBRATION button or perform calibration from
the menu.
Is FINGER TOUCH item of IWB SETUP menu set to ON
?
Set to OFF except for using optional Finger Touch Unit (FT-
01B).
Is the projector tilting?
The projector does not operate properly when it is tilting
largely.
Install the projector horizontally and vertically correct before
performing calibration.
Actual resolution may be different due to output image
with a black frame depending on the type of laptop PC.
In this case, perform the area setup, using IWB AREA
SETUP item of CALIBRATE SETUP menu.
Calibration may be necessary again when you use different
PC.
Troubleshooting
Reference
page
29, 92,
93
–
92, 93
92, 93
155
Hide quick links:
Advertisement
Table of Contents
