Table of Contents
Advertisement
Presentation tools
Interactive Function (continued)
Item
CALIBRATE
SETUP
(continued on next page)
96
Select this item and press the ► cursor button or ENTER
button to display CALIBRATE SETUP menu.
Select an item using the ▲/▼ cursor buttons.
SCREEN TYPE
Select SCREEN TYPE using the ◄/► cursor button.
16:10 ⇔ 4:3
・ The area of screen is set according to the selected SCREEN
TYPE(ratio of height and width).
・ The guide of setting area of screen is displayed.
NOTE
・ When changing SCREEN TYPE, execute AUTO CALIBRATE
(92) or MANUAL CALIBRATE (93).
・ After executing calibration, display calibration pattern and
adjust according to SCREEN TYPE.
・ The position of pen is followed automatically if setting of
resolution or aspect (46) of input signal is changed. So you
don't have to execute calibration again.
・ When a part of image is displayed going beyond the set area,
the function does not work even if touching the point in the
area by pen.
Description
Hide quick links:
Advertisement
Table of Contents
