Adjusting The Projector's Elevator; Adjusting The Zoom And Focus - Hitachi CP-TW2505 User Manual

Hide thumbs Also See for CP-TW2505:
Table of Contents

Advertisement

Operating

Adjusting the projector's elevator

The projector has 2pcs Rear foot for horizontals and inclinations. Spacers on
the each elevator foot are installed at the time of shipment, and projector is in a
condition to be able to just project. If necessary, detach the spacer, and the elevator
feet can be manually twisted to make more precise adjustments.
Spacer
WARNING
to let them swallow the spacers. If swallowed, consult a physician immediately
for emergency treatment.
NOTE
• The adjustment angle can be adjusted up to plus or minus 1° each of
foot.
• After the foot is adjusted, it is possible to return it to the state of the shipment with a spacer.
If change the setting place of the projector, it will recommend keep and reuse the
spacers.

Adjusting the zoom and focus

Press the D-ZOOM + or D-ZOOM - button on the remote
control to display D-ZOOM dialog on screen.
Use the D-ZOOM + and D-ZOOM - buttons to adjust the
picture size.
To finish the operation, do not touch these buttons for about
ten seconds until the dialog is disappeared.
● If you want to expand a part of the image, use the magnify
function (34).
(continued on next page)
30
Rear foot
►Keep the spacers away from children and pets. Be careful not
Rear foot
D-ZOOM - button
INPUT
IWB
CALIBRATION
ASPECT
AUTO
ACCENTUALIZER HDCR
D-ZOOM
FOCUS
+
-
+
-
PAGE
MAGNIFY
MYBUTTON
VOLUME
UP
ON
1
DOWN
OFF
2
KEYSTONE/
PERFECT FIT TEMPLATE
FREEZE
AV MUTE
D-ZOOM + button
ESC
MENU
ENTER
POSITION
RESET
-1~1°
-1~1°

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cp-tw3005

Table of Contents