Hitachi CP-TW2505 User Manual page 97

Interactive Function (continued)
Item
CALIBRATE
SETUP
(Continued)
(continued on next page)
IWB AREA SETUP
Press the ▶ cursor button or ENTER button to set IWB AREA SETUP.
Select AUTO or MANUAL using the ▲ / ▼ cursor button.
AUTO ⇔ MANUAL
・When selecting AUTO, the area of mouse cursor with PC operation
mode of Interactive tool
・When selecting MANUAL, Adjust the area of mouse cursor with PC
operation mode by manual operation.
Adjusting the area of mouse cursor by manual operation
・ Select MANUAL and press the ▶ cursor button or ENTER
button to move mouse cursor on the screen.
・C lick the position of mouse cursor by the pen at the upper left
and then click at the lower right similarly.
NOTE
・ Adjusting by manual operation is unavailable if there is no
signal.
・ Try again if adjusting by manual operation is failed.
・ When selecting AUTO, if following trouble happens
depending on computer, select MANUAL. Though the position
of pen coincides with the drawn line with PJ internal Painter
mode of Interactive tool, the position of pen does not coincide
with the cursor of mouse operating with PC operation mode.
Description
(101)
is adjusted automatically .
Presentation tools
97