Presentation tools
Interactive Function (continued)
USER SETTING
The Interactive Function can be set in IWB CALIBRATE of the EASY MENU or
IWB of the ADVANCED MENU.
Item
AUTO
CALIBRATE
NOTE
•
Accuracy of AUTO CALIBRATE might decrease if you execute AUTO
CALIBRATE just after turning on the projector. Wait more than 2 minutes after turning on
the projector to execute AUTO CALIBRATE.
• Stay away from the projector until AUTO CALIBRATE is completed.
• AUTO CALIBRATE may fail when interfering light falls on the image of the
projector. Be sure not to let the light fall directly on the screen.
• AUTO CALIBRATE may fail depending on the installation environment. In this
case, try adjusting by MANUAL CALIBRATE.
• AUTO CALIBRATE may fail with the board or screen of dark color.
(continued on next page)
92
Performs the initial setting of the Interactive Function
automatically.
• The following pattern image is displayed while executing
AUTO CALIBRATE. The pattern image disappears when AUTO
CALIBRATE is completed.
• Try adjusting by MANUAL CALIBRATE if the position of pen
does not coincide with the drawn line after executing AUTO
CALIBRATE.
Description