Power On/Off - Hitachi CP-TW2505 User Manual

Power on/off

Power on/off
Turning on the power
1.
Make sure that the power cord is firmly
and correctly connected to the projector
and the outlet.
2.
Make sure that the POWER indicator is
steady orange (144).
3.
Press the STANDBY/ON button on the
projector or the remote control. The
projection lamp lights up, and the POWER
indicator begins to blink green. When the
power is completely on, the indicator will
stop blinking and light in steady green
(144).
To display the picture, select an input signal according to the section Selecting an
input signal (28).
The INITIAL SETTING Menu will be displayed by factory default upon startup.
Once the INITIAL SETTING Menu is set, it will not appear until FACTORY RESET
(82) is executed. If you wish to change the settings, refer to the LANGUAGE
(63) and ALTITUDE (75) menu.
(1) LANGUAGE: Use the ▲/▼/◄/►
buttons to select the desired language
and press the ENTER button of the
remote control or the
projector to execute.
(2) ALTITUDE: Use the ▲/▼ buttons to
select NORMAL for altitude below 1600
m (5250 feet), otherwise select HIGH
and press the ENTER button of the
remote control or the
projector to execute.
(continued on next page)
24
button of the
button of the
STANDBY/ON button
POWER indicator
MY SOURCE/
INPUT IWB CALIBRATION
VIDEO COMPUTER DOC.CAMERA
ASPECT AUTO ACCENTUALIZER HDCR
FOCUS D-ZOOM
+ - +
-
ASPECT AUTO SEARCH BLANK
PAGE MAGNIFY MYBUTTON VOLUME
UP ON
1 ＋
DOWN OFF 2 ー
PAGE VOLUME
MAGNIFY FREEZE
KEYSTONE/
UP
PERFECT FIT TEMPLATE FREEZE AV MUTE
ON
ESC MENU
ENTER
DOWN
OFF
POSITION RESET
KEYSTONE MY BUTTON MUTE
1 2
POSITION MENU
ENTER
RESET
ESC