Table of Contents
Advertisement
Installation Guidelines
2.1
Installation Guidelines
When installing the Evolution X5 Satellite Router, observe all caution and warning statements.
Follow the general warnings and cautions in
equipment. However, these guidelines may not cover all of the potentially hazardous
situations you may encounter during installation.
The installation of the IDU must comply with the national and local electrical codes, as
follows:
•
In the United States, the National Fire Protection Association (NFPA) 70, United States
National Electric Code.
•
In Canada, the Canadian Electric Code, Part 1, CC22.1
•
In other countries, the International Electromechanical Commission (IEC)
Recommendation 364, part 1 through part 7.
Review the safety instructions in this chapter, and the safety warnings and compliances
beginning in
or performing maintenance on the system.
•
Always remove or disconnect ALL power connections before installing or removing a
chassis.
•
Keep the staging area clear and free of dust during and after installation.
•
Keep tools, IDU components, and shipping boxes away from walkway area.
•
The IDU operates safely when it is used in accordance with its marked electrical ratings
and product usage instructions.
Table 1. General Safety Warnings and Cautions
Symbol
4
Appendix A, "Warnings" on page 37
Warning type
WARNING/CAUTION
WARNING/CAUTION
DANGER
iDirect Evolution X5 Satellite Router Installation and Safety Manual
Table 1
to help ensure your safety and protect the
of this manual, before installing, configuring,
Definition
Only trained and qualified personnel should
be allowed to install or replace this
equipment.
This equipment is to be installed and
maintained by service personnel only as
defined by AS/NZS 3260 Clause 1.2.14.4
Service Personnel.
Before working on the ODU equipment, unplug
the power cord from the AC power source.
Hide quick links:
Advertisement
Table of Contents
